FAQ - TLV300E / TLV400S General

Post date: Sep 28, 2010 6:47:21 AM

1. Need Manual, Application or Firmware?

http://ftp.teleview.com

ID: TELEVIEW\Guest

password: teleview

2. Data sheet - TLV200D/TLV300E/TLV400S feature list

3. How to download firmware?

- Upgrade from Teleview website. (Teleview URL) Connect an Ethernet cable to the receiver.

Connect the Ethernet cable to internet. If the local network has active DHCP server, the receiver will set IP ADDRESS, NET MASK and GATEWAY IP ADDRESS automatically.

Please make CONFIG/SYSTEM/NETWORK/DHCP menu ON.

However if the local does not have a DHCP Server, enter the IP Address and Gateway address on CONFIG/SYSTEM/NETWORK/IP ADDRESS, CONFIG/SYSTEM/NETWORK/NET MASK and CONFIG/SYSTEM/NETWORK/GATEWAY menu.

Select SAVE on CONFIG/SYSTEM/FIRMWARE UPGRADE/TELEVIEW URL MENU.

The receiver will automatically download firmware from TELEVIEW web site(http://www.teleview.com). When the upgrade is finished, the receiver will ask to reboot it. - Upgrade with FTP (TLVFTPD) Connect an Ethernet cable to the receiver.

Connect the Ethernet cable to local network. If the local network has active DHCP server, the receiver will set IP ADDRESS, NET MASK and GATEWAY IP ADDRESS automatically. Please make CONFIG/SYSTEM/NETWORK/DHCP menu ON. However if the local does not have a DHCP Server, enter the IP Address and Gateway address on CONFIG/SYSTEM/NETWORK/IP ADDRESS, CONFIG/SYSTEM/NETWORK/NET MASK and CONFIG/SYSTEM/NETWORK/GATEWAY menu.

Open Command prompt window on the PC connected in common local network, and type “tlvftpdFW_FILENAME” (tlvftpd is a program that download firmware to receiver available from Teleview on request).

Select SAVE on CONFIG/SYSTEM/FIRMWARE UPGRADE/TLVFTPD MENU of the receiver. The receiver will download firmware from PC using ftp protocol. When the upgrade is finished, the receiver will ask to reboot it. - Upgrade with USB port (USB) Copy the recent version of firmware to any USB memory stick.

The USB memory stick should have FAT16 or FAT32 file system. Plug the USB memory stick to the USB port on the rear panel.

Select EXEC on CONFIG/SYSTEM/UPGRADE FIRMWARE/USB menu. When all of the binary file contents are transferred, wait couple more minutes to write new firmware on the flash ROM. When the upgrade is finished, the receiver will ask to reboot it.

4. How to control Caption function? - The CAPTION sub-menu allows you to set a configuration of the closed caption overlay on the picture. How to watch closed caption on screen display? a) Set CONFIG-MAIN-OSD-'ON' b) Select either EIA-608A or EIA-708B from CONFIG-MAIN-CAPTION – ACTIVE menu. c) If you selected EIA-608A, select valid service CC1~CC7 from CONFIG-MAIN-CAPTION-EIA608A menu. d) If you selected EIA-708B, select valid service SERVICE #1 ~ #7' from CONFIG-MAIN-CAPTION–EIA-708B menu.

5. Want to use SUB menu separated from MAIN menu? - Change CONFIG-CVBS OUT from MAIN to SUB.

6. In the MAIN menu, what "L", "-", and "E" at the side of R1,R2,B1,B2,B3,B4,B5 stand for? - They show the status of RF input signal and ASI-310 input signal. "L" means input signal is locked. "-" means no signal or bad signal quality. "E" means there are some errors.

7. There is "Host Error" in LCD of TLV200D? - It needs to be repaired. Please do not turn the power on. Repeating power on and off may cause other components defective.

8. Does TLV400S support SUB Audio? - It currently does not support SUB audio. But it will be available in the nearest future.

9. Want to change SUB menu to MAIN menu on TAV900A LCD? - The original setting is SUB menu. But we can set MAIN menu on LCD on customers' request before shipment. It is not possible to see both menu at the same time.

10. Other technical support - Having problems with a Teleview products? Get in touch with us, Email:sales@teleview.com.